出口采购新能源汽车电机配套减速机 减速齿轮箱 清单

大宗采购 :减速机

2022-11-28

已兑0

订单信息详情

出口采购新能源汽车电机配套减速机 减速齿轮箱,我是美国公司委托采购,可以发给你技术资料,看看你们是否能做?小批量500-1000台,批量就很多了。是纳斯达克上市公司,做电动商用车的。                       上海

 
减速齿轮箱
要求
用于PEV90–16Turn(3-5类应用)
减速齿轮箱要求文件
 
1. Introduction
This document presents the high-level specifications for a single speed reduction gearbox to be 
operated with the PEV90 – 16Turn motor developed for Class 3 - 5 EV applications.
本文档介绍了与为 3 - 5 级 EV 应用开发的 PEV90 – 16Turn 电机一起运行的单减速齿轮箱的高级规格。
The reduction gearbox will be used to decrease the speed while increasing the torque fromthe motor 
output shaft. The device is applied to the motor output shaft to transform the output shaft 
revolutions of the motor to meet the application torque and speed requirements at the vehicle’s
differential.
减速齿轮箱将用于降低速度,同时增加电机输出轴的扭矩。该装置应用于电机输出轴,对电机的输出轴转数进行变换,以满足汽车差速器的应用扭矩和转速要求。
This typically results in a lighter powertrain system compared to a direct drive powertrainsystem.
与直接驱动动力总成系统相比,这通常会导致动力总成系统更轻。

2. Technical Specifications
The reduction gearbox must be suitable for use in EV traction applications.
减速箱必须适用于 EV 牵引应用。
The table below outlines the reduction gearbox requirements. Suppliers are encouraged tosuggest
suitable alternatives for review if requirements are not feasible.
下表概述了减速箱的要求。 如果要求不可行,鼓励供应商提出合适的替代方案供审查。
 


 
3. Abbreviations, References, and Revisions
3.1 Abbreviations and Acronyms
[any definitions and acronyms used on this document]
Term Definition
DE Drive End
Powertrain System Inverter + Motor + Gearbox (n/a in direct drive)
3.2 Referenced Documents
[only documents cited in this document make the list here]
[1] Motor Drawing DE Face Plate - Document number 1, Name, revision
[2] Document number 2, Name, revision
3.3 Revision History
REV DESCRIPTION ORIGINATOR DATE
1.0 First Release M.T. 2022-11-23
1.1 Click or tap to
enter a date.